![background image](http://html1.mh-extra.com/html/bticino/terraneo-pabx-18d/terraneo-pabx-18d_installer-instructions-for-use_2825136014.webp)
PABX 18D
14
4 SIMPLIFIED PROGRAMMING
The group of “Macrocommands” has been developed for simplified exchange programming. These
commands also reinitialise the basic values of some parameters, as reported for each command.
Before entering the macrocommands the programming access procedure must be performed.
After the programming with macrocommands the exchange must be switched off and back on.
4.1
PROGRAMMING TYPE OF OUTSIDE TELEPHONE LINE
This must be performed when the two lines are pulse-dial or when only one of the two telephone lines is
used.
The commands must be performed after the programming access procedures (see section 3.4).
Example: activating the telephone line as pulse-dial
Lift the receiver
Press the
R
key, you will hear the start-dialling tone
Type:
#
#
Dial the password (e.g. base
1
2
3
4
)
After the start-dialling tone type the Macrocommand:
7 1
0 1
2
0
0
0
#
After hearing the confirmation tone hang up
*
*
#
71
01
1
0
0
0
Telephone
line 1
0 No line
1 Touch-tone line
2 Pulse-dial line
Type of line
Summary of Contents for Terraneo PABX 18D
Page 97: ...Terraneo 97 NOTES ...
Page 98: ...PABX 18D 98 NOTES ...
Page 99: ......
Page 100: ...BTicino s p a Via Messina 38 20154 MILAN Italy www bticino com ...