manualshive.com logo in svg

Bticino Terraneo PABX 18D, Installer Instructions For Use, Page: 34 / 100

Share
Download
Bticino Terraneo PABX 18D Installer Instructions For Use Download Page 34

PABX 18D

34

Example 2 – Modification of house-automation scenario 3.
To disable telephone 408 in house-automation scenario 3 (313) for outgoing calls (the basic programming
for scenario 3 has enabling for outgoing calls), dial:

7.1    ENABLING TELEPHONES FOR INCOMING AND OUTGOING CALLS

This personalisation can be performed using the following command, after performing the programming
access procedure (sect. 3.3).
As a base all the telephones connected to the exchange are enabled for incoming and outgoing calls.

Example 1 – Modification of house-automation scenario 2 (night service).
To  switch all the incoming telephone calls to telephone 401, modifying the programming of house-
automation scenario 2, (can be activated with command 312), which provides as basis for switching to
telephones 401 and 402, dial:

*

*

Just one operation can activate one of the five programmings for:

incoming and outgoing calls (subdivision into bands for each telephone)
remote activation
recognition of the FAX and MODEM tone
door entry services
the Dosa service

These programmings are defined house-automation scenarios.
Each house-automation scenario can be activated by means of one of the following commands 311, 312,
313, 314 or 315.
The exchange is supplied with house-automation scenario 1 (311) active and house-automation scenario
2 (312) programmed for the night service (all incoming calls switched to extensions 401 and 402); the
other house-automation scenarios are the same as the first.
The installer can personalise the house-automation scenarios using the commands described below.
Make a note of the personalisations made in the “summary tables”.

  

7     HOUSE-AUTOMATION SCENARIO PERSONALISATION

*

5

1

01

3

*

0

#

0

0

0

Telephone

number

from 01 to 08

House

automation

scenario

from 1 to 5

Calls

2 outgoing

3 incoming

Line 1

0 disab.

1 enable

5

2

3

0

0

0

#

0

0 2

5

3

2

0

0

0

#

0

0 8

Summary of Contents for Terraneo PABX 18D





































































































Reviews:

No comments