Bticino Terraneo PABX 18D, Installer Instructions For Use, Page: 32 / 100

PABX 18D
32
*
200 04 12
#
*
Internal relay identification
number
04 = internal relay 0
22 = relay 1
25 = relay 2
28 = relay 3
31 = relay 4
34 = relay 5
37 = relay 6
40 = relay 7
43 = relay 8
6.9 PROGRAMMING REMOTELY OPERATED RELAYS AS BISTABLE
ACTUATORS FROM EXTENSIONS AND TELEPHONE LINE
This programming can also define the bistable operation from the outside of the internal staircase light
relay or, if installed, one of the relays on the extra expansion modules item 335916.
The programming on relay 0 excludes the “Switch staircase light on” door entry service and activates the
possibility of controlling the internal relay in bistable mode with a command from the keypad.
6.8 PROGRAMMING REMOTELY OPERATED RELAYS AS MONOSTABLE
ACTUATORS FROM EXTENSIONS AND TELEPHONE LINE
This programming can define the monostable operation and establish the timing even from outside telephone
line of the relay inside the exchange and the relays on the extra expansion modules item 335916.
The programming on internal relay 0 excludes the “Switch staircase light on” door entry service and activates
the possibility of controlling the internal relay in monostable mode with a command from the keypad.
To reset the “Switch staircase light on” function (wit or R8) on relay 0, dial the sequence:
20004 30 #
Example: to program relay 1 as monostable actuator with 30-second timing dial:
Example: to program relay 4 as bistable actuator dial:
2 0 3 1 1 2 # 0
6 ADVANCED PROGRAMMING
2 0 2 2 1 3 # 0
*
200
04
1 0
#
*
Internal relay identification
number
Monostable actuator function Timing
04 = internal relay 0
22 = relay 1
25 = relay 2
28 = relay 3
31 = relay 4
34 = relay 5
37 = relay 6
40 = relay 7
43 = relay 8
0 = 2 seconds
1 = 10 seconds
3 = 30 seconds
4 = 1 minute
5 = 3 minutes
6 = 10 minutes
7 = 30 minutes
8 = 60 minutes
Note: to check relay operation see section 5.1 of the user manual.