Bticino Terraneo PABX 18D Installer Instructions For Use Download Page 43

Page: 43 / 100

Terraneo

8 CALL LOCK MANAGEMENT

8.5 ENTERING PREFIXES OF OTHER CARRIERS

If you want the exchange to recognise other carriers (max 5) proceed as follows:

1. Fill in the table of enabled carriers.

Lift the receiver.

3. Press the

key

Dial the sequence 380 XXXX (where XXXX are the four numbers of the programming password).

Wait for the dial tone.

Dial the sequence nn (from 01 to 05) YYYYYY (carrier prefix from 4 to 6 numbers) R.

Wait for the confirmation tone and then enter other carrier prefixes (maximum 5) repeating
operation 5.

8. Hang up.

If a mistake is made when entering the carrier prefix hang up and repeat all the operations starting from 2.

To cancel a carrier prefix, proceed as above and in point 5 dial the sequence nn (from 01 to 05) R.

Carrier

Prefix YYYYYY

01
02
03
04
05

Summary of Contents for Terraneo PABX 18D





































































































Search results

Summary of Contents for Terraneo PABX 18D

Reviews:

Bticino Terraneo PABX 18D, Installer Instructions For Use, Page: 43 / 100

Search results

Summary of Contents for Terraneo PABX 18D

Reviews: