5.3 - Repair
M2041/5en
SBT-2400 Service Instructions
41
©BTG 2006
5.3.2.2
Mount the Blade and Deflector
1. Verify that the Heli-Coil thread inserts in the screw holes of the blade are in
place.
If not, mount new ones.
2. Mount the blade onto the spindle.
Make sure the transmitter is fixed in the jaw wise during this procedure!
Tighten the screws firmly!
3. Fit the deflector and tighten it in place with the screws.
NOTE!
If the blade type is changed, or the transmitter’s basic adjustment has
been changed, a new basic calibration must be made. See section
5.2.3.1:
Basic Force Calibration with JCT-1200
4. If the blade type is changed, an update of the transmitter specifications
must be performed. See section 5.3.6:
Change Transmitter Specifications
.
5.3.2.3
Mount Transmitter
See Installation Instructions.
Spare parts required:
Blade
Tools required:
2.5mm Allen key/hexagon spanner
Consumable required:
(Heli-Coil thread inserts)
TYPE
NO
POWER
SOURCE
POWER
SOURCE
BTG
Pulp
&
Paper
Sensors
AB,
Industrigat
an
1-3661
2
9
Säf
fle,
SWEDEN
BTG
Pulp
&
Paper
Sensors
AB,
Industrigat
an
1-3661
29
Säf
fle,
SWEDEN
OUTPUT
VOL
T
AGE
4-20
mA
4-20
mA
35
VDC
max
35
VDC
max
NEC
Class
2
NEC
Class
2
