Call screening
When the answering machine is switched on,
you can hear incoming messages and decide
whether to answer them or let your Response
110 continue to take their message. If you
decide to answer the call, lift your Response
110’s handset and the answering machine will
stop and allow you to speak to the caller.
Make sure the speaker volume is set to an
audible level when using call screening.
Edition 9 – 10 March 1999
13
Automatic Call Termination
Your Response 110 will terminate a call under
certain conditions.
• If the caller pauses for longer than six seconds
when recording a message.
• If your outgoing message (including any tones) is
longer than two and a half minutes.
• If the tape comes to an end during recording.
• If the incoming call is longer than 1 minute.
BT recommends that your outgoing message should
be as brief as possible and that you play back any
messages left regularly. This will reset the tape to
the beginning and maximise the time available for
incoming messages.
Using your Response 110
answering machine
Response 110 user guide 19/1/2000 12:43 pm Page 15
