Receiving messages
Your Response 110 will automatically record
incoming calls once it is connected to the
mains power and telephone socket and
switched to
answer on
.
When you get an incoming call, your Response
110 will answer the call after four rings. It will
then play your outgoing message and record
any incoming messages.
To play back your messages
New messages indicator
Check the red
LED
. If you have new messages,
the light flashes.
If there are no new messages, the
LED
will
be on.
•
Press the
REW/PLAY
button. Your messages
are played back in the order they were
received.
During playback you can stop, fast forward or
rewind the tape.
To pause playback
•
Lift the main cover.
•
Press the
SAVE/STOP
button.
Playback pauses. To resume playback press
the
REW/PLAY
button.
To stop playback
•
Lift the main cover.
•
Press the
SAVE/STOP
button. Playback stops.
To fast forward during playback
•
Lift the main cover.
•
Press and hold down the
MEMO/FF
button. When you release the button,
message playback resumes. If you
hear two short beeps, you have reached
the end of all the messages. The tape will
automatically rewind to the start of the
messages.
Using your Response 110
answering machine
MEMO
FF
PLAY
REW
Edition 9 – 10 March 1999
10
Your Response 110 is supplied with a 30 minute
cassette which gives a total recording time of
15 minutes per side, including the time allowed for
your outgoing message. If desired, the tape can be
turned over by hand. You will need to record a new
outgoing message.
SAVE
STOP
SAVE
STOP
Response 110 user guide 19/1/2000 12:43 pm Page 12
