Edition 9 – 10 March 1999
9
Using your Response 110
answering machine
To adjust the speaker volume
•
Press the volume button on the
+
side to
increase the volume. You hear beeps getting
louder to indicate the volume level.
•
Press the volume button on the
–
side to
reduce the volume. The beeps get quieter to
indicate the changing volume level.
Pre-recorded outgoing message
The outgoing message is the greeting a caller
hears when your Response 110 answers a call.
It is supplied with the following pre-recorded
outgoing message:
‘Hello your call cannot be
taken at the moment, so please leave your
message after the tone’.
This message can be
kept as your outgoing message, or if you
prefer, you can replace it by recording your
own message.
Please note
Once you have recorded over the pre-recorded
message it is permanently erased and you will not
be able to retrieve it.
To record your own outgoing message
The outgoing message is the message people
hear when they call you.
•
Press and hold down the
OGM
button for
about 10 seconds or until you hear a long
beep.
•
Release the
OGM
button and record your
message. Speak clearly from about 15/30 cm
from the microphone.
•
Press the
SAVE/STOP
button to end the
recording. Your Response 110 will
automatically replay your message.
•
You can record an outgoing message of up
to 30 seconds.
To record a new outgoing message, repeat the
steps above.
To check your outgoing message
•
Press and release the
OGM
button.
Your message will be played back.
Your outgoing message may sound something like
this “Hello, I’m sorry I can’t take your call at
present. If you would like to leave a message please
speak after the tone”.
OGM
OGM
–
+
Response 110 user guide 19/1/2000 12:43 pm Page 11
