Edition 9 – 10 March 1999
17
To record a new outgoing message remotely
Dial your number and let your Response 110
answer your call. Wait until you hear your
current outgoing message followed by a melody
then a beep.
•
Enter your security code, holding the
button down for 3 seconds. You hear four
short beeps.
•
Enter your security code again, holding the
button down for 3 seconds. You hear two
beeps and and a melody while your
Response 110 sets the tape ready for
recording.
•
When you hear a single beep, record your
new outgoing message, speaking clearly into
the mouthpiece.
•
When you have finished recording, wait for
2 seconds and enter your security code,
holding the button down for 3 seconds.
•
You hear one beep and a melody then your
new outgoing message is played back to you.
•
Hang up. The new message is now set.
Changing your outgoing message
A new outgoing message can only be
recorded from another phone when there are no
incoming messages saved or stored. If you have
messages, play them back as shown above and hang
up to reset the tape to the beginning.
Additional features
To play back your messages remotely
•
Dial your phone number. Wait until your
outgoing message has finished and you hear
the beep.
•
Enter your security code, holding the button
down for 3 seconds.
If you have messages:
•
You hear two beeps then a melody followed
by your messages.
After the last message has been played, you
hear two beeps.
Hang up to reset the MC30 cassette to the
beginning – or you can save your messages or
replay your messages.
If you have no messages:
•
You hear four short beeps, you can then
hang up.
To save your messages:
After your messages have been played, wait
until you hear the two short beeps.
•
Enter your security code, holding the
button down for 3 seconds. You hear two
short beeps.
•
Hang up. Your Response 110 will record
any new messages after the end of your old
messages.
Response 110 user guide 19/1/2000 12:43 pm Page 19
