To rewind during message playback
•
Press and hold down the
REW/PLAY
button.
When you release the button, message
playback resumes. If you hear two short
beeps, you have reached the start of all the
messages. The tape will automatically start
message playback again.
To set your Response 110 to record over
existing messages
•
Press the
REW/PLAY
button to play back
your messages.
When all your messages have been played,
wait until you hear two short beeps to indicate
that the end of the messages has been reached.
The tape automatically rewinds and resets at
the start of the tape. The red
LED
is on
continuously.
New incoming messages will be recorded over
any existing messages.
PLAY
REW
SAVE
STOP
Edition 9 – 10 March 1999
11
Using your Response 110
answering machine
To save messages
You can save messages you have played back.
New incoming messages will be recorded from
the end of the old messages.
Play back your messages and wait for the two
short beeps that tells you there are no more
messages.
•
Lift the main cover and press the
SAVE/STOP
button within 6 seconds.
Your Response 110 resets the tape to record from
the end of the previous messages and the red
LED
flashes to indicate that messages are saved.
To save messages after the machine has
reset the tape to the beginning
You can still save your old messages as long as
no new messages have been received.
•
Lift the main cover.
•
Press and hold down the
SAVE/STOP
button
until you hear a beep.
This may take a little while if you have a lot of
messages. The red
LED
flashes to indicate
saved messages.
SAVE
STOP
PLAY
REW
SAVE
STOP
Response 110 user guide 19/1/2000 12:43 pm Page 13
