6
Installation
44/70
EcoGuide compact web guide control
6.9.1 Preparing the mounting rail
Before mounting the sensor the mounting rail has to be set to the
outmost position.
If the mounting rail is already in the outmost position,
please continue with chapter 6.9.2 "
Removing sensor and
sensor holder
".
Please go through the steps as follows:
1.
Remove the two fixing screws (
see pos. 1 in fig, 20
) of the sen-
sor mounting rail (
see pos. 2 in fig. 20
).
2.
Move the mounting rail to the outmost position determined by
the threaded holes marked with position 3 in fig. 20.
Fig. 20: Moving the mounting rail (example for the right side)
6.9.2 Removing sensor and sensor holder
To change the mounting position sensor and sensor holder have
to be removed from their previous position.
If you just want to mount a second sensor but don't want
to change the position of the existing sensor, please con-
tinue with chapter 6.9.4 "Mounting the sensor".
Please go through the steps as follow:
1.
Remove the fixing screw (
see pos. 1 in fig. 21
) of the sensor and
then remove the sensor from the sensor holder.
2
1
3
