About safety
2
EcoGuide compact web guide control
15/70
During installation work
:
►
Observe all safety and hazard warnings on the BST eltromat
components and on the production machine.
►
Make sure that no small parts (screws, washers, tools, etc.) can
fall into the production machine. Parts falling down can lead to
malfunctions or damage to the machine. If necessary, cover up
moving parts of the production machine with film or cardboard
►
Do not use the
EcoGuide
compact web guide control or ma-
chine frame as a climbing aid or a stepladder.
►
Keep the specified safety distances between the BST eltromat
equipment and the machinery already installed on-site (such as
safety distances to machine panels, building structures, etc.).
►
Ensure that sufficient free headroom is observed. If the free
passage height is restricted, the relevant building components
causing the height restrictions must be padded and danger-
warning signs (yellow / black) must be attached to them.
►
When installing the
EcoGuide
compact web guide control into
the production machine, never remove any safety equipment.
Never decommission safety equipment. If the removal of safety
equipment is necessary for installing the compact web guide
control, the re-installation of the safety equipment must be
carried out immediately after completing the installation work.
After completing installation work
:
►
Remove all tools and auxiliary aids used from the production
machine.
►
Reinstall all safety equipment and covers that had to be re-
moved for the installation work.
2.4 Qualification of personnel
WARNING
Assembly, installation, commissioning, operating and mainte-
nance carried out by unqualified personnel
may cause death or lead to severe personal injuries.
►
Only deploy qualified specialist personnel for the assembly,
installation, commissioning, operating and maintenance of the
compact web guide control.
The
EcoGuide
compact web guide control must only be transport-
ed, installed, connected, commissioned, operated and serviced by
qualified and trained specialist personnel and after they have read
the corresponding installation and operating instructions!
The qualifications required by the personnel are defined as fol-
lows:
