OL-B500-15
1
2
3
VERTICAL POLES
› Fix the rollertube supports to the door poles as shown below
› Do not use a ring on the side where a rollertube support is mounted.
› Two rollertube supports can be mounted per pole.
› Bring the screen in accoring to the drawing below (2) and block it on both sides (M4x20) (3).
› With poles E1 and E4 (door posts on the wall), fix the rollertube support with bolts (2 x M6x25).
DOOR POLES
2
3
›
The roller tube supports can be assembled in two ways depending on the type of fabric. See below
› Fix the rollertube supports to the vertical poles (3 x M6x25) (1).
› Bring the screen in according to the drawing below (2) and block it on both sides (M4x20) (3).
Sergé
PVC (without window)
PVC with window
Fit ring only if no
rollertube support is mounted
