OL-B500-12
3
4
5
6
6. FIXATION MOTOR
› Place the motor plate over the end of the motor and tighten with 3 bolts and (DIN933 M6 x 25) and 2 nuts.
› Do not fit a nut on the bolt nearest to the arm profile!
› Lock the motor head with the circlips.
› Also fit a motor plate on the bearing side. This stops the rollertube from wandering. Do not fit a nut on the bolt nearest
to the arm profile.
DIN933 M6x25
DIN125 M6
DIN125 M6
DIN985 M6
No nut on this bolt
Moto rside
Bearing side
No nut on this bolt
DIN931 M8 x 75
Coupling profile
Right-hand part of the rollertube
Coupling profile
Coupling profile
Left-hand part of the rollertube
