OL-B500-08
DIN985 M8
DIN125 M8
DIN603 M8x25
1
DIN985 M8
DIN125 M8
DIN 7991 M8x90
(DIN7991 M8 x 80 for middle arm)
3
4.2 x 19
4 x DIN 7982 4.2 x 19
4 x DIN 125
6
4 x DIN 985 M6
2
Bolt at the end of the opening
5.b FITTING THE WALL BRACKETS
›
Fix the wall bracket on the arm (1). Make sure that the bolt is in the back of the slot (2). Do not yet tighten the nuts.
›
Place the arms at the front on the just assembled hinge piece, do not yet tighten the nuts. (3)
›
Position the arm and determine the exact position of the wall bracket on the wall. Make sure that the wall bracket is
centred on the arm and stays within the width of the arm. (4)
›
Mark the position of the wall bracket.
›
If it is a construction with three arms and the middle arm goes to a door pole on W1, slide the connecting piece in the
door pole, screw the coverplate on top and fasten the hinge on the connecting piece through the coverplate.
› With a construction with three arms and the middle arm is on beam W1, fit the hinge perfectly in the middle between the
two other hinges.
