Bandit
Copyright 1/10
PAGE 8
MODELS 65XP(XL)/95
MAINTENANCE SECTION
LUBRICATION CHART
NOTICE Use as a reference only, locations may vary depending on options or component manufacturer.
Lubrication point instructions are described on the machine, in the Lubrication & Coolant Section
and Maintenance Section of this manual, or component manufacturer’s manual.
CHECK
# DESCRIPTION
DAY WEEK MONTH PROCEDURE
1 Disc/Drum Bearings
X
Purge bearings daily - wipe off excess
2 Feedwheel Bearings
X
1 shot of grease - wipe off excess
3 Yoke Pivot Bearings
X
1 shot of grease - wipe off excess
4 Hood Hinge
X
1 to 2 shots of grease - wipe off excess
5 Steel Friction Areas: pivoting,
X
Lubricate (i.e. control handle, discharge
hinged, sliding, rolling
flipper, folding pan, winch rollers, etc)
6 Chain Driven Components
X
Dry lube (Swivel discharge, chain
driven feedwheels, etc)
7 Pintle Eye Ring
X
Grease to reduce wear
8 Bandit Throttle Cable
X
Lubricate inner cable & ends SAE 10W/30
9 Discharge Swivel Plates
Months Grease as needed
10 Clutch
Grease per MFG’s instructions
11 Wheel Bearings - if equipped
Grease or oil per MFG’s instructions
12 Tracks - if equipped
Grease per MFG’s instructions
A right angle grease fitting may need to be used to grease
some of the lubrication points. This type of grease fitting
can be obtained from most local automotive parts stores.
