Bandit
Copyright 1/10
PAGE 1
MODELS 65XP(XL)/95
SAFETY PROCEDURES
SAFETY PROCEDURES
Do not attempt to operate the machine on an ascending or descending slope of more than ° or 6% or a
side slope of more than 17° or 30%, it is Dangerous and could be Fatal. This is the maximum slope grade the
machine can be operated on if the hydraulics, self propelled undercarriage, and engine are running at maximum
performance and good traction is sustained.
The machine should never be parked on a slope at any time. The machine can coast or creep causing
equipment and/or personal injury.
DANGER
Make sure everyone is clear of machine before moving the machine. Stay clear of
undercarriage travel system
when the machine is moving.
DANGER
DO NOT
entangle feet or hands in undercarriage travel system.
DANGER
NEVER sit, stand, lay, climb or ride anywhere on this machine while it is running, operating, or in transit. You
will be injured.
DANGER
Use
EXTREME CAUTION
when traveling over non-level surface! This machine can tip over or tip backwards
on non-level surface. You will cause engine damage, machine damage and possible personal injury!
DANGER
WARNING
Any increase from the specified maximum operating angles may cause loss of lubrication function and damage
the engine.
WARNING
Maximum Slope Grade
Diagram shows percentage to degree of slope.
Percentage is in vertical feet for every 100 horizontal feet.
Ascending or Descending Slope
Side Slope
IF MACHINE IS EQUIPPED WITH A SELF PROPELLED UNDERCARRIAGE
Machines equipped with undercarriage tracks are shipped with a manual from the track manufacturer. Refer
to it for service, operation, and safety information.
