©2004,2002 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-2700 06-11-2004
24
10) Turn the circuit breaker ON.
11) Plug power supply into a grounded 120VAC wall outlet.
12) Secure the power supply with the bracket provided.
13) Mount (1) remote at the top of the rail and (1) at the
bottom of the rail. (Refer to the Standard Call/Send
Transmitter section later in this manual.)
The power supply should be plugged into a household outlet at
all times.
THE ONLY EXCEPTION IS WHEN TURNING UNIT 'OFF'
(SEE LONG TERM STORAGE SECTION).
If the power supply plug and
wire will be located in an
area where the power supply
could be
accidentally unplugged,
Bruno recommends the use
of a plug lock
(available at hardware and
home improvement stores).
ROUTING WIRE HARNESSES
INSTALLATION
INSTALLATION
Be sure the power supply
will not pose
a tripping hazard.
power supply
CONNECTING THE POWER SOURCE (con't.)
