©2004,2002 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-2700 06-11-2004
20
INSTALLATION
INSTALLATION
INSTALLING THE SEAT ASSEMBLY
REMINDER:
Recheck with level after tightening
adjustment bolts.
ADJUSTING THE CARRIAGE ANGLE
1) Fold down the footrest
.
2) With the footrest folded down, LOOSEN BUT DO NOT
REMOVE the (2) M14 x 2 x 70mm hex head cap screws
using a 22 mm wrench.
3) Place a level on the footrest.
4) Pivot the seat support tube forward or backward
as necessary to level the footrest.
5) While holding the seat support tube steady, tighten
the (2) screws loosened in Step 9 to a torque of 80 ft. lbs.
1) Make sure the rocker switch and seat safety switch wires
are tucked into the seat swivel tube.
2) Clip the shipping tie securing the swivel cover assembly.
