©2004,2002 BRUNO INDEPENDENT LIVING AIDS, INC.®
21
SRE-2700 06-11-2004
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLING THE SEAT ASSEMBLY (con't.)
3) Using a Phillips head screwdriver, remove the
(2) cylinder bumpers and (4) screws securing the
swivel cover.
4) Put the swivel cover to the side.
MAKE SURE FOOTREST IS DOWN!
5) With the SEAT FOLDED UP and while LIFTING UP
THE SWIVEL LEVER, slide seat post over the wires
and onto the seat support tube.
6) To make sure the seat assembly is completely
seated on the support tube, rotate the seat
assembly back and forth while gently pushing
the seat post down onto the tube.
• footrest down
• seat cushion folded up
• lift up swivel lever
• slide seat post over
wires and tube
