Bruker BioSpec 70/30 USR V2, Manual

Page: 68 / 104

Planning Details
68 Site Planning Information BioSpec 70/30 USR_2_V020
6.7.1 Line lengths for the MRI CryoProbe
The following additional components must be considered when planning the cable routes
when an MRI CryoProbe™ is planned to be used. See Table
Table 6.3 [
}
42]
1 Power supply for CRP components
2 Helium gas cylinder
3 CRP compressor
4 CRP cooling unit
5 CRP preamplifier
6 CRP temperature control unit
The following cable lengths are available:
Connection Minimum bending
radius
Available lengths
Connection cable for electrical
distributor(*) - CRP compressor 20 cm 7 m
Connection cable for electrical
distributor - CRP cooling unit 10 cm 10 m
Helium transfer line for compressor -
CRP cooling unit 30 cm 6, 10, 20 m
Helium transfer line for CRP cooling
unit - CRP preamplifier 70 cm 3, 4, 5, 6 m
Control cable for CRP preamplifier -
CRP temperature unit 10 cm 15 m
He cylinder gas tubes 20 cm 10, 20 m
(*) installations at 60 Hz require a pre-switched transformer for connection to the electrical distributor