BRP Ski-doo Tundra Series, Operator'S Manual

Page: 45 / 171

CONTROLS, INSTRUMENTS AND EQUIPMENT
WARNING
Fast reverse while turning, could
result in loss of stability and con-
trol.
2) Throttle Lever
Throttle lever is located on the RH side
of handlebar.
Designed to be thumb activated.
When squeezed, it increases the en-
gine speed. When released, engine
speed returns automatically to idle.
(All Except 600 ACE)
mmo2008-008-011_b
TYPICAL
1. Throttle lever
2. To accelerate
3. To decelerate
WARNING
Test the throttle lever operation
each time before starting the en-
gine. The lever must return to the
rest position once released. Oth-
erwise, do not start engine.
Throttle Lever (600 ACE)
Throttle lever is located on the RH side
of handlebar.
Designed to be either thumb activated
or finger activated. When squeezed, it
increases the engine speed. When re-
leased, engine speed returns automat-
ically to idle.
mmo2015-008-103_a
TYPICAL
WARNING
Test the throttle lever operation
each time before starting the en-
gine. The lever must return to its
the rest position once released.
Otherwise, do not start engine.
Switching from Thumb to Finger
Throttle Position
CAUTION It is highly recom-
mended to immobilize the snowmo-
bile before attempting any modifi-
cation to the throttle position as it
could lead to a hazardous situation.
There are mainly three positions to
choose from when going from the
thumb to the finger throttle position
and the best one will be to the rider's
preference and in direct relation with
the riding style and conditions.
mmo2015-008-102_a
THUMB THROTTLE POSITION : PUSH
DOWNWARD TO ROTATE THROTTLE
HOUSING
_______________
43