BRP Ski-doo Tundra Series, Operator'S Manual

Page: 62 / 171

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2010-007-015_a
1. Hood front tab
2. Bottom pan slot
2. To secure rear of hood to the con-
sole, position the rear hood slots
over the console tabs, then push
down.
mmo2010-007-016_a
1. Rear hood slot
2. Console tab
3. Position hood outer tabs under the
front rubber ties, then latch rubber
ties.
mmo2010-007-017_a
1. Hood outer tab
2. Front rubber tie
24) Side Panels
WARNING
Never operate engine with side
panels opened or removed from
vehicle.
Side Panel Removal
1. Unlatch front, upper and lower rub-
ber ties.
mmo2010-007-012_b
1. Front rubber tie
mmo2010-007-018_a
1. Lower rubber tie
2. Upper rubber tie
2. Pull panel backwards.
Side Panel Installation
1. Insert lower front tab into the bot-
tom pan slot.
60
______________