BRP Ski-doo Tundra Series, Operator'S Manual

Page: 119 / 171

STORAGE
3. Push the SET (S) button repeati-
tively until odometer is displayed
(total milieage).
mmr2009-004-002
NOTE: The storage mode does not
function in other modes (trip A, trip B
and hr trip).
4. Repeatedly depress the HI/LOW
beam switch rapidly, then, while
doing this , press and hold the SET
button until “PUSH S” appears on
the display.
NOTE: It is critical for this procedure
to depress the HI/LOW beam switch
repeatedly
before holding down the
SET button.
mmr2009-004-003
5. When the gauge displays "PUSH S",
release all buttons.
6. Again, press and hold the SET but-
ton for 2 - 3 seconds.
The gauge will display "OIL" when the
engine enters storage procedure (sum-
merization feature).
mmr2009-004-004
Do not touch anything during engine lu-
brication cycle.
The engine will increase its RPM to ap-
proximately 1600, then the oil pump
will "fog with oil" the engine for 30-60
seconds.
When completed, the engine will stop
by itself.
Remove D.E.S.S. key.
NOTICE
Do not start the engine
during storage period.
______________
117