BRP Ski-doo Tundra Series, Operator'S Manual

Page: 108 / 171

MAINTENANCE PROCEDURES
mmr2009-133-003_a
LOAD READING
1. Upper O-ring
9. Load reading must be as per the fol-
lowing table.
TRACK ADJUSTMENT
SPECIFICATION
Track deflection
setting (SC-5M) 30 mm - 35 mm
(1-3/16 in - 1-3/8 in)
Track deflection
setting (SC-5U)
40 mm - 45 mm
(1-3/16 in - 1-3/8 in)
Track load reading 7.3 kg (16 lb)
10. If load reading is not in accordance
with the specification, adjust track
tension. Refer to
TRACK TEN-
SION ADJUSTMENT
.
Track Tension Adjustment
1. Remove tether cord and key.
2. Remove rear wheel caps (if so
equipped).
mmr2008-048-007_a
1. RH rear idler wheel cap
3. Loosen the rear idler wheel retain-
ing screws.
mmr2008-048-008_a
1. RH rear idler wheel bolt
4. Tighten or loosen both adjustment
screws to increase or decrease
track tension.
mmr2008-048-009_a
1. RH adjustment screw
5. If correct tension is unattainable,
contact an authorized Ski-Doo
dealer.
6. Retighten retaining bolts to specifi-
cation.
TORQUE
Retaining
bolts
48 N•m ± 6 N•m
(35 lbf•ft ± 4 lbf•ft)
7. Check track alignment as described
below.
106
______________