BRP Ski-doo Tundra Series, Operator'S Manual

Page: 52 / 171

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2007-009-073_b
TYPICAL
Step 1: Position seat in place
Step 2: Push seat forward until it latch
NOTE: A distinctive snap will be felt.
Double check that the seat is secure by
giving it a tug to confirm proper latch-
ing.
mmo2007-009-074
TYPICAL - SEAT INSTALLED
WARNING
Make sure seat is securely latched
before riding.
14) Tool Kit
A tool kit containing tools for basic
maintenance is supplied with the vehi-
cle.
The tool kit support is located in engine
compartment on pulley guard.
NOTICE
Make sure tool kit is se-
cured properly to avoid contact with
CVT (continuously variable trans-
mission).
To remove the tool kit support from the
pulley guard, unlock the tab from un-
derneath the pulley guard and pull the
tool kit support upwards to release it.
mmo2011-003-001_a
TYPICAL
1. Tool kit
15) Front and Rear
Bumpers
To be used whenever snowmobile re-
quires manual lifting.
CAUTION Use proper lifting
techniques, notably using your legs
force. Do not attempt to lift either
end of the vehicle if it is above your
limits. Use appropriate lifting de-
vice or have assistance to share lift-
ing stress if possible.
mmo2010-007-010_a
FRONT
1. Front bumper
50
______________