BRP Lynx Commander 800R E-TEC 2018, Operator'S Manual

Page: 94 / 118

MAINTENANCE PROCEDURES
Rear Suspension Lubrication
Lubricate rear suspension at grease fit-
tings using the recommended grease..
Refer to
MAINTENANCE SCHEDULE
for maintenance frequency.
fmo2015-003-008_a
1. Grease fittings
RECOMMENDED SUSPENSION
GREASE
(P/N POL TD 3011)
or
(P/N 293
550 033)
Steering and Front Suspension
Condition
Visually inspect steering and front sus-
pension for tightness of components
(steering arms, control arms and links,
tie rods, ball joints, ski bolts, ski legs,
etc.). If necessary, contact an autho-
rized Lynx dealer.
Skis
Wear and Condition of Skis and
Runners
Check the condition of the skis and ski
runner carbides. If worn, contact an
authorized Lynx dealer.
WARNING
Excessively worn skis and/or ski
runners will adversely affect snow-
mobile control.
Blade Ski
Standard position for Ski is that Ski run-
ner is installed on center holes.
fbl2013-002-014_c
TYPICAL
1. Ski leg
2. Ski
3. Ski Runner
Ski stance can be adjusted by spacer
location. It can be installed inside or
outside of the ski leg
fmo2014-003-009_a
1. Spacer on inside of ski leg
Fuses
Fuse Inspection
The electrical system is protected with
fuses.
Check fuse condition and replace it if
necessary.
To remove fuse from holder, pull fuse
out. Check if filament is melted.
1
2
A 1 5E0KA
1. Fuse
2. Check if melted
_______________
91