BRP Lynx Commander 800R E-TEC 2018, Operator'S Manual

Page: 50 / 118

CONTROLS, INSTRUMENTS AND STANDARD EQUIPMENT
3. Detach accessory attachment.
4. Install hairpin clip.
20) Adjustable Handlebar
The handlebar height can be adjusted,
as follows:
1. Pull up the lock lever.
619900929-005_a
1. Lock lever
2. Bring the handlebar to the desired
position and push down the lock
lever to lock it.
21) Track
WARNING
Never stud a track that has not
been approved for studs.
In-
stalling studs on an unapproved
track could increase the risk of the
track tearing or severing, possibly
resulting in serious injury or death.
Before proceeding with the installation
of special studs on tracks you must
contact your authorized LYNX snow-
mobile dealer for current specific stud-
ding availability and applications.
BRP does not recommend to ride a
snowmobile equipped with high lug
profile track at
high speed in a trail, on
hard packed surfaces or ice for an ex-
tended period of time.
In the event that you have to, reduce
your speed , then minimize the dis-
tance you ride on those surfaces.
CAUTION Running those
tracks at high speed in a trail, on
hard packed surfaces or ice put more
stress on the lugs, which tend to
heat up as a result. To avoid poten-
tial degradation or damage to the
track, reduce your speed, then mini-
mize the distance you ride on those
surfaces.
For general instructions on mainte-
nance of tracks, refer to the sections
TRACK and in MAINTENANCE PRO-
CEDURES
.
22) Fuses
The electrical system is protected
with fuses, refer to
FUSES
in
MAIN-
TENANCE PROCEDURES
for details.
23) Anchor Points for
Cargo
Two anchor points are provided to se-
cure cargo in rear rack.
NOTICE
Do not exceed maximum
load capacity of rear rack. MAXI-
MUM cargo load is 30 kg (66 lb).
619900929-006_a
1. Anchor points
_______________
47