BRP Lynx Commander 800R E-TEC 2018, Operator'S Manual

Page: 60 / 118

SPECIAL EQUIPMENT
619900929-032_a
1. Lower retaining strap
3. Use the plastic tabs to hook the re-
taining straps to the windshield.
619900929-033_a
1. Retaining strap hooked
2) Infrared Light
619900929-021_a
1. Infrared light
The infrared light is enabled only when
the vehicle lights are in the black out
mode, refer to
BLACK OUT MODE
in
this section.
To operate the infrared light, use the
ON/OFF switch located on the con-
sole. Refer to
SPECIAL EQUIPMENT
SWITCHES
in this section.
To select HI or LOW, use the
HEAD-
LIGHTS DIMMER SWITCH
in the
MULTIFUNCTION SWITCH
located
on the LH handlebar.
3) Blackout Light Support
Intended to install a blackout light as
needed.
619900929-008_a
1. Blackout light support - light not included.
A connector is provided for connecting
a blackout light.
619900929-022_a
1. Blackout light connector
A switch is already installed in the con-
sole to operate a blackout light. Refer
to
SPECIAL EQUIPMENT SWITCHES
in this section.
_______________
57