BRP Can-Am Commander XT 1000R 2021, Operator'S Manual

Page: 99 / 236

CONTROLS
219001733-003_a
HEADLIGHT SWITCH FUNCTIONS
1. Lights OFF
2. Low beam and taillight
3. High beam and taillight
Engine Stop Switch
219001731-001_b
TYPICAL
1. Engine stop switch
This switch can be used to stop the en-
gine and as an emergency control.
To stop engine, set the engine stop
switch to the STOP position.
NOTE: While the engine can be
stopped by removing the D.E.S.S.
key from the D.E.S.S. post, we rec-
ommend the engine be stopped by
setting the engine stop switch to the
STOP position.
Engine Start Button
219001731-001_d
TYPICAL
1. Engine start button
2. Engine stop switch
When engine start button is pressed
and held, it starts the engine.
NOTE: To allow engine starting, the
D.E.S.S. key must be securely installed
on the D.E.S.S. post and the engine
stop button set to RUN.
To power up the vehicle without start-
ing the engine, refer to
WAKING UP
THE ELECTRICAL SYSTEM
.
Override/DPS Button
Depending on the vehicle model, this
button has up to 3 functions.
While reading this Operator’s Guide, remember that:
WARNING
Indicates a potential hazard that, if not avoided, could result in serious
injury or death.
_______________
97