BRP Can-Am Commander XT 1000R 2021, Operator'S Manual

Page: 46 / 236

PRE-RIDE INSPECTION
WARNING
Perform a pre-ride inspection before each ride to detect any potential prob-
lem that could occur during operation. The pre-ride inspection can help you
monitor component wear and deterioration before they become a problem.
Correct any problem that you discover to reduce the risk of a breakdown or
crash.
Before using this vehicle, the operator should always perform the following
pre-ride inspection check list.
Pre-Ride Inspection Check List
What to Do Before Starting the Engine (Key OFF)
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Engine oil Check engine oil level.
Coolant Check coolant level.
Brake fluid Check brake fluid level
Leaks Check for any leaks under vehicle
Throttle lever
Activate throttle lever several times to ensure it operates
freely. It must return to idle position when released
Parking brake Apply parking brake and check if it operates properly
Tires
Check tire pressure and condition. Refer to
SPECIFICATIONS
and adjust according to load.
Wheels
Check wheels for damage and for abnormal play, and
check lug nuts are tightened. Tighten wheel beadlock
bolts (if equipped). Refer to
WHEELS AND TIRES
in
MAINTENANCE PROCEDURES
for torque specification.
Radiator Check cleanliness of the radiator
Drive shaft boots Check drive shaft boots and protectors condition
Check if operator seat is in place and properly latched
Check if passenger seat or the glove box are in place and
properly latched (2-UP Models)
Seat(s)
Check the passenger backrest and grab handles condition
(2-UP Models)
44
_______
SAFETY INFORMATION
________