BRP Can-Am Commander XT 1000R 2021, Operator'S Manual

Page: 96 / 236

CONTROLS
WARNING
Make sure parking brake is re-
leased before operating the ve-
hicle. If parking brake is left ON
while riding, it may cause damage
to the brake system and cause loss
of braking capacity and/or fire.
4) Brake Pedal
The brake pedal is located on the RH
side footrest.
vmo2012-012-015_a
1. Brake pedal
When the brake pedal is pressed
down, the rear brake is applied.
When released, the brake pedal should
return to its original position.
Braking effect is proportional to the
force applied on the pedal.
NOTE: The brake will have also an ef-
fect on front wheels through the drive
train when 4WD is engaged.
Should the brake lever system fail, the
rear brake can be used by depressing
the brake pedal.
5) Shift Lever
The shift lever is located on the RH side
of the vehicle near steering column.
vmo2012-012-010
SHIFT LEVER LOCATION
The shift lever is used to change the
gearbox position.
The shift lever has 5 positions:
SHIFT LEVER POSITIONS
POSITION GEAR
P Park
R Reverse
N Neutral
H High range (forward)
L Low range (forward)
vmo2012-012-036
SHIFT PATTERN
The vehicle must be stopped and
brakes applied prior to selecting any
gear.
NOTICE
This gearbox is not de-
signed to shift while vehicle is mov-
ing.
94
______________