BRP Can-Am Commander XT 1000R 2021, Operator'S Manual

Page: 115 / 236

EQUIPMENT
vmo2015-007-010_a
1. Passenger's seat
2. Integrated backrest
When riding without a passenger, the
passenger seat can be removed to al-
low the use of a glove box.
vmo2013-007-005_a
TYPICAL
1. Glove box
WARNING
Without its passenger's seat, the
vehicle becomes a ONE RIDER ve-
hicle (1-UP model) and NO PAS-
SENGER must be allowed on ve-
hicle. NEVER carry passenger on
glove box and NEVER ride without
a passenger seat if no glove box is
installed.
Passenger's Seat Removal
1. To unlock latch, pull the passenger's
seat latch lever toward the front of
the seat..
vmo2015-007-010_c
1. Seat handle
2. While maintaining latch lever pulled
towards the front, apply downward
pressure on the back of latch lever
to clear rear latch from pin and tog-
gle seat towards front using back-
rest.
Models with Passenger's Heated
Grips and/or Heated Visor Connector
Underneath the seat, disconnect the
electrical connector.
All Models
3. Pull seat rearward and up out of lo-
cation to clear the front tabs.
While reading this Operator’s Guide, remember that:
WARNING
Indicates a potential hazard that, if not avoided, could result in serious
injury or death.
______________
113