BRP Can-Am Commander XT 1000R 2021, Operator'S Manual

Page: 54 / 236

RIDING THE VEHICLE
vmo2012-012-520
2 2-UP Models
The passenger must keep his hands on the grab handles and his feet on footrests
at all times.
The passenger must synchronize his movements with the operator.
Crossing Roads
If you have to cross a road, the lead driver should get off his vehicle, then observe
and give directions to the other riders. The last person after crossing then assists
the lead driver to cross. Do not travel on sidewalks. They are designated for
pedestrian use.
Turning
Practice turning at low speeds before attempting to turn at faster speeds.
Keep both hands on handlebars and feet on footpegs.
Maintain a constant speed or a slight acceleration during turn.
To reduce the risk of rollovers:
– Use care when turning.
• Do not turn the handlebar too far or too fast for your speed and environment.
Adjust steering inputs accordingly.
• Slow down before entering a turn. Avoid hard braking during a turn.
• Avoid sudden or hard acceleration when turning, even from a stop or low
speed.
– Never attempt donuts, skids, slides, fishtails, jumps, or other stunts. If vehicle
starts to skid or slide, steer in the direction of the skid or slide. Never slam the
brakes and lock the wheels.
– Avoid paved surfaces. This vehicle is not designed to operate on paved surfaces
and is more likely to roll over. If you must drive on pavement, turn gradually, go
slowly, and avoid abrupt acceleration and braking.
52
_______
SAFETY INFORMATION
________