BRP Can-Am Commander XT 1000R 2021 Operator'S Manual Download Page 82

Page: 82 / 236

IMPORTANT ON-PRODUCT LABELS (ALL COUNTRIES EXCEPT CANADA/UNITED STATES)

Label 1

WARNING

– Locate and read operator's guide. Improper ATV use can result in SE-

VERE INJURY or DEATH. Follow all instructions and warnings.

– Always wear ear protection.
– Locate and read operator's guide. Improper ATV use can result in SE-

VERE INJURY or DEATH. Follow all instructions and warnings.

– Never use on public roads.
– Never carry a passenger on 1-up models and NEVER carry more than one

passenger on 2-up models.

– Never use with drugs or alcohol.

8012

https://

can-am.brp.com

/off-road/safety

Safety Video

Patent : www.brp.com/en/about-brp/patents.html

EN-704908012-DEC

LABEL 1 - 1-UP MODELS

_______

SAFETY INFORMATION

________

Summary of Contents for Can-Am Commander XT 1000R 2021













































































































































































































































Search results

Summary of Contents for Can-Am Commander XT 1000R 2021

Reviews:

Related manuals for Can-Am Commander XT 1000R 2021

Brands by name

Popular brands

BRP Can-Am Commander XT 1000R 2021, Operator'S Manual

Search results

Summary of Contents for Can-Am Commander XT 1000R 2021

Reviews:

Related manuals for Can-Am Commander XT 1000R 2021

Brands by name

Popular brands