BRP Can-Am Commander XT 1000R 2021, Operator'S Manual

Page: 122 / 236

EQUIPMENT
Also, when winching for more than
30 seconds, it is recommended to in-
crease engine RPM in the range of
3000 RPM to increase charging power
to the battery.
NOTICE
Make sure vehicle is in
NEUTRAL (N) before increasing en-
gine RPM.
Refer to
WINCHING GUIDE
, supplied
with the vehicle, for more information
about the winch.
16) GPS Receiver (Global
Positioning System) (If
Equipped)
The GPS receiver is located on the
handlebar and provides the vehicle po-
sition on earth.
CAUTION Always install the
GPS on its support whenever using
the vehicle.
vmo2013-007-016_a
TYPICAL
1. GPS receiver
It is powered via the vehicle electrical
system when installed on its support
(when electrical system is ON), or via
batteries when removed from its sup-
port.
GPS receiver can be activated using
the ON/OFF button on the receiver or
with the electrical system (when in-
stalled on the vehicle).
The GPS comes from factory with
all the necessary accessories to be
specifically used on this vehicle. It in-
cludes:
– Rechargeable battery
– Standard
map: WW Autoroute
DEM Basemap NR 3.00 with gen-
eral basic road information
– Quick Start Manual and Warranty in-
formation.
vbs2010-009-001
TYPICAL KIT
NOTE: Always refer to manufacturer's
documentation supplied with the GPS
receiver for proper use.
NOTE: For more details about the
GPS receiver, available maps or acces-
sories, contact an authorized Can-Am
dealer or visit
Garmin website at
www.garmin.com .
WARNING
– Reading the GPS receiver can
distract from the operation of
the vehicle, particularly from
constantly scanning the envi-
ronment. This could lead to a
collision.
– Before reading the GPS re-
ceiver, ensure your environ-
ment is clear and free from ob-
stacle, and bring the vehicle to a
low speed.
– Additionally, make sure to often
double-check for obstacles.
120
______________