Browan 2251XW User Manual Download Page 33

Page: 33 / 187

BW2251 User Guide v1.0

Nov. 2013

Page 32 of 187

Status

– select status from the drop-down menu.

Disabled

– disable the DHCP server service.

DHCP Server

– enable the DHCP server service.

Choose DHCP Server to enable DHCP server service.

DHCP Server

This DHCP server service enables clients on the LAN to request configuration information, such as IP
address, from a server. Settings of the DHCP service can be viewed just like the follow page.

Figure 38 – DHCP server Settings

By default, DHCP server is disabled.

IP Address from / IP Address to

– specify the IP address range to be dynamically allocated by the

DHCP server.

Netmask

– enter the netmask for IP pool range.

Gateway

– enter the gateway IP for wireless clients.

WINS Address

(Windows Internet Naming Service) – specify server IP address if it is available on the

network [dots and digits].

Lease Time

– specify the IP address lease interval in seconds [1-1000000].

Domain

– specify the DHCP domain name [optional, 1-128 sting].

DNS address

– specify the DNS server’s IP address [in digits and dots notation].

DNS secondary address

– specify the secondary DNS server’s IP address [in digits and dots

notation].

Change status or leave in the default state if no editing is necessary and click the

Save

button.

Summary of Contents for 2251XW




























































































































































































Search results

Summary of Contents for 2251XW

Reviews:

Related manuals for 2251XW

Brands by name

Popular brands

Browan 2251XW, User Manual

Search results

Summary of Contents for 2251XW

Reviews:

Related manuals for 2251XW

Brands by name

Popular brands