Browan 2251XW User Manual Download Page 132

Page: 132 / 187

BW2251 User Guide v1.0

Nov. 2013

Page 131 of 187

Figure 222 –Apply or Discard User ACL Changes

Apply

Changes

– to save all changes of User ACL at once

Discard Changes

– restore all previous values

Please be careful to use the DROP policy. For example, if DROP tcp for any
source IP, BW2251 web UI will not be accessed.

User | Walled Garden

The

walled

garden

is an environment that controls the user's access to Web content and services. It

is to define a free, restricted service set for a user do not logged into the system. Use the

User |

walled garden

menu to view or change the free URLs or hosts:

Figure 223 –Walled Garden

New

URL

– click the

new

URL

button and enter the new URL and its description. Save entered

information by clicking the

update

button:

Figure 224 – Add New URL part 1

URL

for

User

– define full URL address. Ex:[http://www.test.com]

String

Display

– site description visible to user listed on the

welcome

and

login

page:

Summary of Contents for 2251XW




























































































































































































Search results

Summary of Contents for 2251XW

Reviews:

Related manuals for 2251XW

Brands by name

Popular brands

Browan 2251XW, User Manual

Search results

Summary of Contents for 2251XW

Reviews:

Related manuals for 2251XW

Brands by name

Popular brands