BW2251 User Guide v1.0
Nov. 2013
Page 124 of 187
Select
Allow
means only the wireless clients whose MAC are listed in the
MAC List
would be
permitted to access this AP. Other wireless client cannot access this AP.
Select
Deny
means only the wireless clients whose MAC are listed in the
MAC List
would be
prevented from accessing. Other wireless clients can access this AP.
Select
Disabled
means no ACL service.
Figure 205 – MAC ACL settings
You must create
MAC List
to work with
Policy
setting. The access control list is based on the
network device’s MAC address. In the MAC ACL Configuration table, you only need to specify the
MAC address of wireless client. Click the
Add
button to create a new MAC entry:
Figure 206 – Add MAC entry
MAC
Address
– enter the physical address of the network device you need to (MAC address). The
format is a list of colon separated hexadecimal numbers (for example: 00:90:4B:00:11:22)
Save
– click the button to save the new MAC entry
Figure 207 – Apply or Discard MAC ACL Configuration Changes
Apply
Changes
– to save all changes made in the
interface
table at once
