III - 10
[ 4 ] Disassembling the Roll Guide
(1) Release the two pins of the roll guide actuator to remove the roll guide actuator
from the roll guide.
(2) Remove the roll guide spring A from the roll guide actuator.
(3) Slide the roll guide shaft to the left and align the three grooves of the roll guide
shaft with the three ribs of the roll guide to remove the roll guide shaft from the
roll guide.
NOTE:
Take care not to lose the spring.
(4) Remove the roll guide spring B from the roll guide shaft.
Figure 3.4-9 Disassembling the Roll Guide
Roll guide
Ribs
Roll guide shaft
Roll guide spring A
Roll guide spring B
Roll guide actuator
Pins
Summary of Contents for TD-4000
Page 1: ...SERVICE MANUAL MODEL TD 4000 TD 4100N ...
Page 139: ...Dec 2009 SM PT031 1 ...