1 - 5
(4) Click the "General setting…" button.
Figure 7. Setting screen
(a) “RS test port”
Set the COM port number to be used for the "RS test". (Default: COM1)
When the setting is not known, the procedure of investigating the COM port
number that can be used with PC is indicated to the end of this chapter.
(b) “Print pattern”
Set the printing pattern file (*.prn) to be used for inspection. Select the file
from the displayed screen with the "Browse..." button.
• Die cut margin adjustment print pattern :
TD4000_P51X26_LN_0901027.prn
• Free length margin adjustment print pattern :
TD4000_P102_LN_QAZ_090826.prn
* Normally it is not necessary to change the printing pattern.
(5) Click the "OK" button after completing all settings, and return to the main screen.
When stop the setting, click the "Cancel" button.
Caution: The data of set contents are not saved. Therefore, at the time of the next tool
start, be careful because it is necessary to set it again.
(a)
(b)
Summary of Contents for TD-4000
Page 1: ...SERVICE MANUAL MODEL TD 4000 TD 4100N ...
Page 139: ...Dec 2009 SM PT031 1 ...
