1 - 10
(5) Check the Cover Sensor (Cover sensor check)
Inspect whether the cover sensor works correctly.
1) Click the "Cover sensor check" button.
Figure 14. Check the cover sensor
2) Open and close the top cover of the machine. The message in the "Results"
column is changed to "off" or "on". If the states of "off" and "on" are detected,
"Undo" in the "Results" column is changed to "Done".
Figure 15. Cover sensor of "off" and "on" states
3) If the "Cover Sensor 0" and "Cover Sensor 1" are changed to "Done", click the
"Quit sensors check" button to finish the inspection. If "OK" appears, the
inspection is completed correctly.
Figure 16. Check the cover sensor
If the states of "off" and "on" are
detected, "Undo" is changed to "Done".
If open and close the top cover,
the message is changed to "off" or "on".
The judgement is "OK".
Summary of Contents for TD-4000
Page 1: ...SERVICE MANUAL MODEL TD 4000 TD 4100N ...
Page 139: ...Dec 2009 SM PT031 1 ...
