4
(4) “General Settings”
Set various items before the inspection. (Refer to Fig. 3.)
Note: The settings are not saved.
Fig. 3 Setting screen
(4-1) “RS test port”
Set the COM port to be used for the RS test. (Default: COM1)
(4-2) “Print pattern”
Set the print pattern file to be used for the inspection.
In accordance with the table below, specify a file for each print pattern of the
“Print pattern” section in the “General settings” window.
Items to be examined
File name (PRN file)
“Adjustment print test (continuous)”
P102_ latest date.prn
“Adjustment print test (62mm 2Labels)”
P62100_Non_ latest date.prn
“Adjustment print test (62mm 1Label)”
P62100_ latest date.prn
(4-3) Click the “OK” button after completing all settings.
Note: It is impossible to change other items than the above.
(4-1)
(4-2)
(4-3)
