Brother PE-Design 8 Page 220 Instruction Manual Download | Manualshive

Page: 220 / 269

background image

218

Basic Font Creator Operations

The Design Page
guidelines

The standard guidelines for creating fonts are
shown in the Design Pages. The contents of each of
the guidelines are as shown below.

(A)

Base Line

This line is the reference for positioning the
font character.
Normally, from this line to the

Capital Line

will

be the font height. This line cannot be moved.

(B)

Capital Line

The font’s standard height will be from the

Base Line

to this line. This line cannot be

moved.

(C)

Mean Line

When in lower case, the standard height of the
font will be from the

Base Line

to this line. It

can be moved by dragging the triangle icon on
the right edge.

(D)

Descender Line

This line is the standard for characters with
parts that hang down (descenders) such as
“g” and “y”. It can be moved by dragging the
triangle icon on the right edge.

(E)

Ascender Line

This line is the standard for characters with
parts that extended above (ascenders) such
as the accent mark. It can be moved by
dragging the triangle icon on the right edge.

(F/G)

Set Line

This line will be the font width. The font width
can be adjusted by dragging the triangle icon
on the bottom edge.

(E) Ascender Line

(B) Capital Line

(C) Mean Line

(A) Base Line

(D) Descender Line

(G) Set Line

(F) Set Line

Triangle icon

b

Memo:

• The heights and widths specified for the

Base Line

,

Capital Line

and

Set Lines

are

the reference mask for creating the font
character.

• When characters created with Font Creator

are imported into Layout & Editing, the
width and height of the characters will be in
the following area.

• Character height: from Base Line (A) to

Capital Line (B)

• Character width: from Set Line (F) to

Set Line (G)

• In order to align the height of the characters,

the

Ascender Line

,

Mean Line

and

Descender Line

appear the same with all

characters. Therefore, if the height of any of
these lines is changed, the setting is
maintained, even when a different character
is selected to be edited.

• The widths of the

Set Lines

can be set

separately for each character.

«
...
218
219
220
221
222
...
»

Summary of Contents for PE-Design 8














































































































































































































































































Reviews:

No comments

Related manuals for PE-Design 8

Brand: NEC Pages: 4

CLX 6210FX - Color Laser - All-in-One

Brand: Samsung Pages: 65

4116 - SCX B/W Laser

Brand: Samsung Pages: 16

JUNOS PUS MOBILE SECURITY SUITE

Brand: Juniper Pages: 6

Brand: Billion Pages: 42

Brand: NETGEAR Pages: 282

Brand: Creative Pages: 84

CERTIFICATE SYSTEM 7.2 - AGENT GUIDE

Brand: Red Hat Pages: 73

Brand: Adaptec Pages: 6

IBM OS/2 v2.x & Warp

Brand: Adaptec Pages: 6

SMALL BUSINESS SERVER

Brand: Intel Pages: 79

MapCreate Canada 6.3

Brand: LEI Extras Pages: 1

Brand: da Vinci Technologies Pages: 249

Brand: FieldServer Pages: 22

Brand: Daikin Pages: 16

Brand: IBM Pages: 15

Brand: Zennio Pages: 15

B DLTSAGE INTEGRATION

Brand: Tandberg Data Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands