manualshive.com logo in svg

Brother PE-Design 8, Instruction Manual

The Brother PE-Design 8 Instruction Manual is available for free download on our website. This comprehensive manual provides step-by-step instructions and detailed explanations to help users make the most of this embroidery design software. Get your copy today from manualshive.com and unleash your creativity with ease.

Share
Download
background image

185

Tutorial (Advanced)

Tut

or
ia

l (Adv

a

n

c

e

d

)

■

Saving the design

The entire design is saved as a single file 
(.pes).

■

Writing the design to an original 
card

A design for a multi-position hoop is created 
by considering the pattern in each hoop 
installation position as one pattern, then 
combining them.

Therefore, when this type of design is written 
to an original card, one multi-position hoop 
design is saved as a combination of multiple 
patterns.

: This pattern is sewn when the hoop is 

installed at the top installation position 
(position a).

: This pattern is sewn when the hoop is 

installed at the middle installation position 
(position b).

: This pattern is sewn when the hoop is 

installed at the bottom installation position 
(position c).

Therefore, the frame installation position 
sewing order for the pattern shown above is b, 
a, then c.

Notes on embroidering using the multi-
position hoop

• Before embroidering your design, sew a 

trial sample of the design on a scrap piece 
of fabric from your design, making sure to 
use the same needle and thread.

• Be sure to affix stabilizer material to the 

back of the fabric and tightly stretch the 
fabric within the hoop. When embroidering 
on thin or stretch fabrics, use two layers of 
stabilizer material. If no stabilizer material is 
used, the fabric may become over-
stretched or wrinkled or the embroidery 
may not be sewn correctly.

• For more ways to stabilize large designs, 

refer to “Attaching stabilizer to the fabric” on 
page 178

• Use the zigzag stitch for sewing the 

outlines in order to prevent embroidering 
outside the outlines.

• For patterns that require the hoop to be 

installed at different installation positions, 
design the embroidery pattern so that the 
various parts of the pattern overlap in order 
to prevent misalignment while 
embroidering.

b

Memo:

If the file size or the number of color changes 
is larger than the specified number, or if one of 
the patterns does not completely fit within an 
embroidery area, the message “Please 
change the object size or position. Do you 
want to save the data anyway?” appears.

Overlap

Summary of Contents for PE-Design 8














































































































































































































































































Reviews:

No comments

Related manuals for PE-Design 8

Samsung UN40C7000WF User Manual preview
UN40C7000WF
Brand: Samsung Pages: 7
IBM System Storage DS3000 Installation Manual preview
System Storage DS3000
Brand: IBM Pages: 38
Patton electronics ForeSight 6300 NMS Getting Started Manual preview
ForeSight 6300 NMS
Brand: Patton electronics Pages: 117
Xerox DocuColor 6060 Installation Manual preview
DocuColor 6060
Brand: Xerox Pages: 204
Alcatel-Lucent Wireless Network Guardian 9900 Brochure preview
Wireless Network Guardian 9900
Brand: Alcatel-Lucent Pages: 2
Honeywell Dolphin 7200 Software Manual preview
Dolphin 7200
Brand: Honeywell Pages: 2
Honeywell INTEGRA User Manual preview
INTEGRA
Brand: Honeywell Pages: 14
Honeywell 7850LP-I1-5210E - Hand Held Products Dolphin 7850 User Manual preview
7850LP-I1-5210E - Hand Held Products Dolphin 7850
Brand: Honeywell Pages: 36
Honeywell Dolphin Demos User Manual preview
Dolphin Demos
Brand: Honeywell Pages: 46
Honeywell RAPID EYE MULTI-MEDIA Operator'S Manual preview
RAPID EYE MULTI-MEDIA
Brand: Honeywell Pages: 144
Honeywell ARENA User Manual preview
ARENA
Brand: Honeywell Pages: 160
Honeywell WebVision User Manual preview
WebVision
Brand: Honeywell Pages: 176
Honeywell Dolphin Power Tools User Manual preview
Dolphin Power Tools
Brand: Honeywell Pages: 176
Art & Logic DMF-560TX Brochure preview
DMF-560TX
Brand: Art & Logic Pages: 2
Linux LINUX ENTERPRISE DESKTOP 10 SP1 - Manual preview
LINUX ENTERPRISE DESKTOP 10 SP1 -
Brand: Linux Pages: 76
Red Hat APPLICATION STACK 1.3 RELEASE Release Note preview
APPLICATION STACK 1.3 RELEASE
Brand: Red Hat Pages: 26
Vonamic 10059 Configuration Manual preview
10059
Brand: Vonamic Pages: 30
Navman SPiN 100 User Manual preview
SPiN 100
Brand: Navman Pages: 52

Brands by name

Popular brands

Load more brands