Brother PE-Design 8 Page 12 Instruction Manual Download

Page: 12 / 269

Design Center

●

An eraser tool has been added to the Tool Box in the Line Image Stage.

●

The maximum setting for

Thinning Process

when converting a line image to a figure handle image has

been increased. This allows thicker figure handle lines to be created.

Font Creator

●

A TrueType font character can be opened as a template. In addition, a custom font can be created
automatically from a TrueType font.

●

Characters other than letters of the alphabet, numbers and symbols can be registered.

●

If a template image was open when custom font data is saved in PEF file, the template image will be
saved with the data.

■

General

●

New sample embroidery files have been added to the Design Library.

●

The estimated sewing time has been added to the design properties.

●

Embroidery hoop sizes 200 × 200 mm(7.3/4 × 7.3/4 inches) and 200 × 300 mm(7.3/4 × 11.3/4 inches)
have been added to the

Design Page Property

dialog box.

●

File formats have been added to those available for images that can be opened as templates or original
images.

GIF(.gif) format is supported.

LZW-compressed .tif is also supported.

Summary of Contents for PE-Design 8














































































































































































































































































Search results

Summary of Contents for PE-Design 8

Reviews:

Related manuals for PE-Design 8

Brands by name

Popular brands

Brother PE-Design 8, Instruction Manual

Search results

Summary of Contents for PE-Design 8

Reviews:

Related manuals for PE-Design 8

Brands by name

Popular brands