Brother P-touch PT-3600, Service Manual

Page: 65 / 165

III-31
(7) Assemble the lock arm on the pin of the body cover and rotate the hook of the lock arm to
insert the hook into the “A” of the body cover.
(8) Reassemble the lock arm spring on the lock arm to be effect against the body cover as
shown below.
Note: Apply the silicon grease (Shin-Etsu Chemical brand G501) by a half rice-grain sized
drop on each “B” portion of lock arm.
Fig. 3.2-5 Reassembling the Lock Arm and Lock Arm Spring
“B”
Body cover
“B”
“A”
Body cover
Lock arm
Hook
Lock arm spring
Lock arm