Brother P-touch PT-3600, Service Manual

Page: 67 / 165

III-33
(2) Insert the diode (SLR-342MC) in the LCD holder and solder it to the LCD PCB ASSY (PT-
9600 only).
Note: Do not mix up the plus and minus pins of the diode. The longer pin is for “plus” while
the shorter pin is “minus”.
(3) Insert the LED PCB ASSY into the hooks “B” in two places of the LCD holder (PT-9600
only).
(4) Pass the leads (three harnesses) of the LED PCB ASSY through the slot of the LCD holder
and solder it to the LCD PCB ASSY (PT-9600 only).
Note: Solder the leads (three harnesses) to the LCD PCB ASSY in accordance with the
color indications on the LCD substrate.
Fig. 3.2-7 Reassembling the LCD Module Unit (2)
(5) Reassemble the light plate ASSY to the LCD module unit fixing with the hooks in three
places.
Fig. 3.2-8 Reassembling the LCD Module Unit (3)
Diode
LCD PCB ASSY
Hole
Hook “B”
Hook “B”
LCD PCB ASSY
LCD holder
LED PCB ASSY
Leads (three harnesses)
Hook “A”
LCD module unit
Hook “A”
Light plate ASSY