Brother P-touch PT-3600, Service Manual

Page: 106 / 165

III-72
(4) After the completion of printing, the machine cuts the tape automatically and shifts the
display to one as shown in Fig.41.
(5) Check the start position of the print area of the print sample.
Fig. 41
(6) Press the “RET” key while the LCD displays as shown in Fig.41. The display shifts to
the RS I/F Port Check Mode as shown in Fig. 42.
2.12. RS I/F Port Check Mode ( “ 0 ” key )
This mode checks the RS I/F port.
Note: This mode is used only for PT-9600.
Fig. 42
(1) Press the “RET” key. The display shifts to one as shown in Fig.43.
Fig. 43
(2) The machine checks the RS-232C I/F port. (Displays “RXD” on the LCD).
(3) Press the “RET” key while the LCD displays as shown in Fig.43. The display shifts to
the Clock Display Mode as shown in Fig.44.
2.13. Clock Display Mode ( “ Q “ key )
This mode corrects the clock display accurately.
Note: This mode is used only for PT-9600.
Fig. 44
(1) Press the “RET” key. The display shifts to one as shown in Fig.45.
(2) Once resets the RTC time and reads the current time to display.
Fig. 45