Brother P-touch E550W Page 16 User Manual Download

Page: 16 / 91

GETTING STARTED

Power Supply

Alkaline/Ni-MH Battery

After making sure that the power is off, remove the Rear

Cover on the back of the printer. If the batteries are already

installed in the printer, remove them.

Insert six new AA-size alkaline batteries (LR6), or fully

charged Ni-MH rechargeable batteries (HR6). Make sure

that the positive (+) and negative (-) ends of the batteries

match the positive (+) and negative (-) marks inside the

Battery Compartment.

Users of alkaline batteries

Users of Ni-MH rechargeable batteries

Attach the Rear Cover by inserting the three hooks at the

bottom into the slots on the printer, and then pushing down

firmly until it locks into place.

Always replace all six batteries at the same time using brand
new ones.

Always replace all six batteries at the same time with fully
charged ones.

Visit support.brother.com for the latest information about
recommended batteries.

• Remove the batteries if you do not intend to use the printer for an extended period of time.
• Dispose of the battery at an appropriate collection point, not in the general waste stream.

In addition, be sure to observe all applicable regulations.

• When storing or discarding the battery, wrap it (for example with

cellophane tape), to prevent it from short-circuiting.

(Battery insulation example)

1. Cellophane tape

2. Alkaline or Ni-MH battery

Summary of Contents for P-touch E550W




























































































Search results

Summary of Contents for P-touch E550W

Reviews:

Related manuals for P-touch E550W

Brands by name

Popular brands

Brother P-touch E550W, User Manual

Search results

Summary of Contents for P-touch E550W

Reviews:

Related manuals for P-touch E550W

Brands by name

Popular brands